Hot / Cold Runner Car Parts Mold For Auto Rear Console Parts Cover
, Automotive Injection Mold
♦ Mold and Injection Part Material
We offer a range of materials in standard mold steel such as LKM,
Finkl Daido steel and our Chinese material like P20, H13, S50 etc.
Product materials including ABS, Nylon, Acetal, Polystyrene,
Polypropylene, PC, PVC, UPE etc and relative composite material ABS
with Glass filling, Nylon with Glass filling, PC with glass filling
etc.
Any special materials or requirement, our engineer team will
consult with you before production, we will order these material
from China local market or your side send to us.
♦ Injection Mold Design
Our injection molds design from a few thousands to ten thousands
production or more, from automotive, medical, electronics, PC and
consumer products etc, our engineer team will customized products
to you from mold design to production, choice appropriate mold
materials and optimized machining process to reduce lead time and
costs, as usual, these local molds will be injected in our plant.
Normally, those high standard molds will be exported to oversea, we
used DME and HASCO international mold standard to design and
manufacturing.
♦ Mold and Plastic Part Quality
Our engineers use DFM for all of parts from molds to production,
the molds design we will usually uses Mold flow simulation review,
from mold base, steel, electrode, runner system the whole process
inspection and report. Especially, the mold base, steel, runner
system we ask detail certification before machining, during
machining, our engineer is strictly check the process to ensure
each stage part perfect.
Plastic injection parts we will inspect them from raw materials
certification to sample, pre-production till final production, our
quality team is more attention to check them and report relative
data to make sure all of parts meet requirement.
♦ Injection Mold and Injection Part Tolerance
Our quality team is strictly complying with ISO system procedure to
control each of stages process, based on DIN 16742 standard to
implement, If our customers have any special requirement, our
engineer team will consult with you priority to fix agreement
specification to ensure product tolerance.
♦ Secondary Machining Process
ERBIWA offers more secondary finishing service to customers needs
like painting, silk-screen,Ultrasonic welding, packaging, assembly
etc in order to make the product aesthetic as customers needs, and
provide more good solutions for good quality. please kindly visit
our product finishing service in details.
♦ Production Process
| 1 | Quotation | Need 2D/3D drawing or Samples |
| 2 | Mould Design | Mould design drawing could be sent for confirmation in one week
after receiving the down payment |
| 3 | Mould Making | Start mould manufacturing only after the mould design is confirmed
by customers |
| 4 | Mould Trial | 1st shot samples will be available for checking |
| 5 | Sample Confirmation | Customer to check and confirm samples |
| 6 | Second Payment | Customer need to pay for the 2nd payment once received the T1 shot
samples |
| 7 | Mould Modification | Modify the mould if necessary |
| 8 | Mould Delivery | To deliver the mould after received the 3rd payment |
| 9 | After-Sales Service | Free of charge for 12 months warranty |
| 10 | Unpaid Balance | Customer need to pay for the balance after molds having been
shipped out two months |
♦ Sample Show
RFQ is always welcome, we sincerely hope to cooperate with customer
from home and abroad.
Kindly contact me if any questions. It is our pleasure to be on
service of you.
